Asus berriz deitu nuen duela gutxi eta Maiatzaren 26an kaleratuko dutela adierazi zidaten. Egiatzat hartu beharko dugu… Webgunean  ofizilaki agertzen da eta webguneko Support atalean manualak eskura daude erderatutak, bai Linux pekoa eta baita Win XP koa.
Aterako duten modeloa 7 pulgadatakoa eta 4 gigatako diska gogorra duena izango da, bai Xandros linux distroarekin edo Windows XP homerekin. Prezioak europa mailan dituenak izango dira. 299€ Linuxduna eta 329€ win xpduna.

Dagoeneko Frantzia, Alemania eta Erresuma batuan 9 pulgadatako bertsioa salgai dute auzkalo noiz helduko zaigun guri.

Burua berotzen jarraitzeko hemen duzue argazkitxo batzuk…

Pasadan azaroaren 28 an Ikasbloggers lehengo bilera ospatu zen Erandioko IEFPS Ategorri-Tartanga institutuan. Ikastolatik atera eta gero, ahalik eta arinen hurbildu nintzen, hala ere berandu heltzeko.

Eskolaz erratu eta gero azkenez aurkitu nuen bileraren aretoa. Lehen hezkuntzako eskola bat institutuaren parean dago eta google maps argazkian ez zen oso ondo bereizten.

Berandu heltzeak lehenengo lerroan jesartzea suposatu zuen. Antza denez ez naiz atzean jesartzeko joera duen bakarra.

Partaideen aurkezpen errondaren erdian heldu nintzen eta entzundako proposamenak eta esperientziak guztiz interesgarriak iruditu zitzaidan. Denboraz justu samar genbilen eta Blog honen berri justu hitzez emateko aukera izan nuen.

Bilerako partaide gehienak aurretik ezagutzen zirela ohartu nintzen eta beraiek garatutako  proiektuak nahiko ezagunak ziren taldearen barruan. Lantaldearen  Wiki bat sortu genuen elkar harreman tresna moduan erabili ahal izateko, bueno hobeto esanda Mikel Agirregabiriak sortu zuen dida batetan, eta erabiltzaile moduan alta hartu genuen rapidamentian.

Azkenez eta bukatzeko Institutuko zuzendariak “Demo”bueltatxo bat eman zigun etxea pixka bat ezagutzeko. Oso esperientzia interesgarria eta etekin handiak eman ahal duena iruditu zait. Ea hurrengoa noiz eta non ospatzen dugun.

Ikusi eta gero, hartu ezazu bi minutuko epea haltza aurretik, hainbeste barre egin eta gero malkoak eta gorritasuna desagertu arte.

Prestakuntza saio batzuk prestatzen nengoela ara non eta Bubbl.us tresnarekin topo egin dudala. Aurretik Concept Maps edo Mapa kontzeptualak egiteko beste tresna batzuk erabili izan ditut. IHMC CMap tools, Mindomo, Visio, UPV beta fasean dagoen CM-ED kontzeptu-mapa editorea, etab. Guzti hauen artean gehien erabili dudana IHMC Cmap tools delakoa da eta nahiz eta oso malgua izan, ba dauzka portaera batzuk hobetzeko modukoak.

Beno harira, Bubbl.us hau gutxi frogatu dut baina iruditu zait oso egokia. sinplea, arina, txukuna eta malgua. Flash eta Ajax erabiltzen duen aplikazio bat da eta inprimatzeko, partekatzeko eta lana talde moduan lan egiteko aukera ematen du. Ez dauzka aukera asko baina agian hori da bere indarra.

Egileak errusiar bat eta Kazhastandar bat dira. (Borat Moduan;-D). 

Multi hizkuntzak menperatzen ditu, txinatarra eta japaniera barne.

Mapak beste blog edo webguneetan txertatu daitez enbed codea erabiliz edo emailez bidali hal dira. 

Ikasleekin lan egiteko tresna bikaina iruditu zait. Arazo bakarra momentuz ingelesez bakarrik dagoela  da.

Egileen Bloga, garapenaren jarraipena egiteko, helbide honetan dago 

Gaur Burura etorri zait berriz, eta google bitartez arakatzen hasi naiz ea kaleratze datak zehaztutak dauden eta ea nolako prezioa izango duen… Hasierako iragarritako 199 $ prezioa baita ere poliki poliki gorantza doa eta.

Argazki asko aurkitu ditut eta interesgarriena, bideoak!

Hona hemen aukitutakoa:

Kriptopolis foroa ia egunero irakurtzen duen lankide batek , nire anaia, bitnamiri buruzko berria eman zidan.

Ikusita jende asko dagoela web berria frogatzeko asmoz, webgune honetan aurre egositako "stack" batzuk eskaintzen dituzte. Wordpress, joomla, roller, mediawiki etab.

Ingelesez dago baina egileak zezenaren larrukoak dira, beraz gure ondokoak. Foro sistema bat dute eta segituan erantzuten dute egiten zaien galderetara.

Bueltatxo bat eman eta frogatu. Agian ez bada konponbidea, gutxienez  pakete hauek frogatzeko aukera bikaina. 

Akats bakarra dute. Makina berean demagun, wordpress blog sorta bat sortu nahi ezkero, bakoitza bere Apache instalazioa izango du.  Gero portu bereziak zehaztu beharko dira hurrengoko instalazioetan… 

Bitnami

Recuva erreskatera! Antza denez izena "recover" hitzaren pronuziazioa da ¿? WEB gunean agertzen den azalpena hau da ( ingeleraz)

Recuva (pronounced "recover") is a freeware Windows utility to restore files that have been accidentally deleted from your computer. This includes files emptied from the Recycle bin as well as images and other files that have been deleted by user error from digital camera memory cards or MP3 players. It will even bring back files that have been deleted by bugs, crashes and viruses!

Programatxoa beta fasean zegoenetik erabiltzen dut maiz eta oso os gutxitan ez du lortzen berreskuratzea nahi ditudan artxibo edo argazkiak. Benetan erabilgarria eta hau da daturik garrantzitsuena

dohainik !

WWW.RECUVA.COM 

]]> http://truki.blogsome.com/2007/10/11/recuva-ezabatutako-artxiboak-bereskuratzeko-tresna/feed/ http://truki.blogsome.com/2007/06/06/redhat-linux-mac-ordenagailu-batetan/ http://truki.blogsome.com/2007/06/06/redhat-linux-mac-ordenagailu-batetan/#comments Wed, 06 Jun 2007 07:24:55 +0000 Javi Hardwarea Bitxikeriak Linux http://truki.blogsome.com/2007/06/06/redhat-linux-mac-ordenagailu-batetan/ Red hat magazine bidaltzen duen hileroko newsletter atik jasotako artikulua. Ez daukat Mac makinarik eta segur aski ez dut izango epe laburrean. Hala ere oso interesgarria iruditu zait eta segur aski Ubuntu edo Fedorarekin gauza bera egiteko prozedura antzerakoa izango da. Artikuluaren arazo bakarra ingeleraz dagoela da. Ba liteke denbora izatekotan euskarara itzultzea baina por siaka ez utzi arnas egiteari.

Hau da artikulua bere kokapen originalean.

Eta hau da artikulua zuzenean zurrupatua.  

Painless dual-booting with Red Hat Enterprise Linux 5 and a MacBookPro by Noah Gift

 

I know there are many OS X users curious about running Linux on their Mac hardware, but are overwhelmed with the configuration options. There are also many Linux users who want to work on one machine and would like to dual-boot OS X and Red Hat Enterprise Linux 5. Here’s one scenario—in the animation industry. Maybe you want to work on OS X for video editing but want to boot RHEL 5 for your Animation Software, and Gnome/KDE specific open source applications. You may also be a developer who wants to work in and develop cross-platform applications. RHEL 5 is a great developer platform and now you can work in both worlds. Enough talk, lets get your MacBookPro dual-booting.

These instructions are specifically for dual-booting with MacbookPro, but there should only be minor changes to apply these instructions to different models of Mac Hardware. Preparation You will need to perform 6 steps before beginning:

Step 1: Perform a full backup of your hard drive onto an external drive. This is not an optional step. There is a chance you could lose data, so do not proceed without fully backing up your system. The easiest way to do this is to boot onto an external firewire drive running OS X and to make a disk image of your whole partition using the Disk Utility Application. Please refer to Apple documentation on your computer if you have never done this before.

Step 2: Download and install Boot Camp: http://www.apple.com/macosx/bootcamp/. Please note you must carefully read the installation instructions before installing. In some situations you may need to perform a firmware upgrade before using bootcamp.

Step 3: Download the ATI video driver for Linux x86, RadeonX1600. This is the exact download URL: https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.36.5-x86.x86_64.run Or you can also go directly to the driver page and select the driver yourself: http://ati.de/support/driver.html

Step 4: Copy this driver onto a USB stick. You will use this USB stick to install the driver from the command line after you install RHEL5, as the X window system will not start so you won’t have access to a GUI web browser.

Step 5: You need to have access to a wired internet connection as you will need to authorize your RHEL 5 installation, perform updates and do some package installations using YUM to complete the installation. Getting wireless working is beyond the scope of this article, but can be done later.

Step 6: Have a copy of all five RHEL 5 discs downloaded, and both the installation and entitlements codes printed out.

Step 7: Finally, print out this article during your installation as you don’t want to have to remember commands from memory later.

 

Creating a second partition with Boot Camp.

 

Boot Camp was designed to repartition your OS X hard drive so you can create an additional Windows volume to boot from. It also modifies the EFI bootloader to show an additional volume called Windows. I won’t go through the specifics of how to run Boot Camp, you can refer to the bootcamp documentation that comes with the application. In a nutshell, create another volume of about 20-30GBs that you will later erase when installing RHEL 5. Please note you do not need to create a Windows driver CD as you won’t need it. Please format the partition as a FAT32 partition for the purpose of this tutorial, although it really doesn’t matter as we will be deleting this partition later.

 

Installing RHEL 5

 

Step 1: Boot to RHEL 5 CD Insert the RHEL 5 Installation Disk into your machine and change the startup disk in System Preferences to the RHEL 5 CD. Please note you can also reboot and hold down the “option” key to see all available boot volume options. You will do this later as the way to select RHEL 5 booting after you’re done installing.

Step 2: Once you boot onto the CD, you can go through the default options until you get to Disk Partitioning. Please be extremely careful as if you select the wrong choices you will delete your hard drive permanently.

2a. Make sure all external drives are detached before you begin. If you have an external firewire drive or usb stick please remove them and navigate back several screens until the Disk Partitioning dialog starts over.

2b. Select Custom Layout.

2c. There is a 99% chance you will see three partitions: /dev/sda1 vfat /dev/sda2 hfs+ /dev/sda3 fat32 2d. You want to highlight the fat32 partition which should probably be additionally be marked at /dev/sda3 and mark it for deletion and apply the changes. Please be extremely careful and double check that the partition is a fat32 partition before you delete it.

2e. Go back to the original dialog boxes and select option: “Use existing free space”. This will now automatically partition the free space you just created by deleting the windows partition into a customized Linux layout. You should see something like this: VGVolGroup00 21344M volgroup LVLogVol01 21344M swap LVLogVol00 1984M ext3 / The sizes will be different depending on how much RAM you have and what size of partition you created. Again double check and make sure that you still have a vfat and hfs+ partition before you commit any changes.

Step 3: Go through the rest of the installation until you get to the Boot Loader Configuration. Please install Grub and tell grub to install on the first sector of the boot partition and not the MBR or Master Boot Record or Grub will fail to install as the MBR is where Apple stores its Boot Information.

Step 4: Select what software package groups you would like to install. I selected Software Development, Virtualization, and Webserver as I used the Developer 30-day Evaluation entitlement.

Step 5: When the software installs, you’re almost done. But in order to get a GUI running we will need to do a little more work. Remember the seven steps I mentioned in the beginning of the article? You’ll need to use them now. Booting into RHEL 5 Whenever you want to boot into RHEL 5 you will need to hold down the “option” key while you are rebooting. This will bring you to a screen that shows an OS X and a Windows partition. You will need to select the “Windows” partition icon to boot into RHEL 5. (I know, how ironic.)

Pay careful attention to the Grub boot process. You will need to press the return key when you see the red Grub splash screen to append a kernel boot time parameter.

The OS X hardware is a little tricky to boot into linux and so you will need to select “e” to edit the kernel options and put this exactly to the kernel line in Grub, otherwise you will get a kernel panic: append=”noapic” The line should look something like this now: kernel /xen.gz-2.6.18-8.el5 append=”noapic” Press return to enter the data and then “b” to boot with this option. Later you will need to permanently edit grub.conf to hold these boot time parameters. Don’t forget to edit this file later. You should now be booting into RHEL 5, but the X Windows system will not be able to start as you don’t have the proper ATI driver loaded yet.

 

Getting the GUI to work

Step 1: Update Update your system, but make sure you’re plugged into a wired internet connection first. Type in exactly: yum update

Yum will now trigger registration to Red Hat Network. Enter your installation code.

Step 2: Mount your files. Place your USB stick into your system and mount it into /mnt. To do this type in the command exactly: fdisk -l You should see the output list all of the volumes on your system and should see one called something like /dev/sdb VFAT. This is your USB stick.

Type this command to mount it: mount /dev/sdb /mnt

Step 3: Install the ATI driver Change into the directory: cd /mnt ls -l

You should see the ATI driver you downloaded earlier: ati-driver-installer-8.36.5-x86.x86_64.run

Please make a directory in /opt mkdir /opt/ati

then: mv ati-driver-installer-8.36.5-x86.x86_64.run /opt/ati

then: cd /opt/ati You are moving the driver off of your USB stick into the /opt directory so you can generate an rpm for installation. Next, you’re ready to install the driver so you can begin using a GUI again. A black terminal is only nice for so long.

Run the installer by typing this into the terminal: ./ati-driver-installer-8.36.5-x86.x86_64.run

Please go through the wizard and select the Generic driver. This will now create an rpm for you to install. When the wizard is done you will see an rpm called: fx…blah…rpm Please install this driver by using the rpm install command: rpm -ivh fx…blah…rpm

You will most likely see an error complaining that you do not have the correct C++ library installed. Don’t worry, you can use yum to fix that for you: yum install c++library Now issue the install command again. rpm -ivh fx…blah…rpm

You should have now installed the ATI driver. Take a deep breath and relax. There are only two commands left to bring your machine’s GUI to life:

Step 4: Configure xorg.conf through the aticonfig tool.

4a. First run: aticonfig –initial This will create an intial aticonfig file.

4b. Then configure it for your Macbook resolution: aticonfig –resolution=0,1440x900

5. Launch the GUI: Type in exactly to start the GUI: startx

You’re now running RHEL 5. Pat yourself on the back.

 

Summary Quick rewind:

We used BootCamp to create another partition by resizing the internal hard drive, and we then installed RHEL 5.

Because we were prepared before beginning, we were able to install the ATI driver and get the X Windows GUI working.

Note: Wireless configuration is beyond the scope of this article, but can be done by using a 3rd party driver from http://madwifi.org/. Shout, scream, and show your new dual-boot RHEL 5 laptop to all your friends.

This entry was posted by Noah Gift on Wednesday, May 16th, 2007 at 8:00 pm and is filed under technical.

]]> http://truki.blogsome.com/2007/06/06/redhat-linux-mac-ordenagailu-batetan/feed/